How to change battery
- First, unscrew the screws under the stand plate to loosen the cover.
- Then unplug the cables connected to the battery.
- After this, you can unscrew the screws around the battery to loosen the battery.
- Then replace the old battery with the new one.
How to change motherboards
- First, unscrew the screws under the stand plate to loosen the cover.
- Then unplug the cables connected to the system board / controller.
- Unscrew the screws around the system board / controller to loosen it.
- Then replace the old motherboard / controller with the new one.
Below you will find a help video that demonstrates how to replace both the battery and motherboard for the E2S V2. The procedure is identical for E2S JUNIOR.
see video:
0
0
Was this article helpful?
Articles in this section
- Replacing display E2S JUNIOR
- changing battery and motherboard - E2S JUNIOR
- changing to a puncture-free tire
- correction of skewed fork E2S junior
- Changing front fender and rear fender E2S junior
- Changing handlebars E2S junior
- Changing tire and hose E2S Junior
- changing the accelerator pedal - E2S junior
- tightening brake E2S junior
- tightening the folding mechanism E2S Junior